Autel Maxidas DS708 scanner reset Audi A4 EPC light
The EPC light came on vehicle may cause car violently start shaking. Here is an instruction on reset EPC light and enable Open / Close electric parking brake of Audi A4 with the Autel MaxiDAS DS708 diagnostic scan tool.
Instruction:
Connect the MaxiDAS DS708 scanner with vehicle
Power on the DS708 system
Select vehicle region: European
Select vehicle manufacturer: Audi
Autel MaxiDAS scan tool will read the VIN automatically
Select “Maintenance function” from main function menu
Select “Electronic parking brake (EPB)”
Turn ignition ON (very important)
Start electric parking brake and handbrake programming
Follow these steps to program:
---Start brake pad change (open brakes completely)
---Change brake pads
---End brake pad change (close brakes)
Follow the system prompts
Press “-1-” button to come to “Start brake pad change” program
Then the brakes are fully opened
Wait the brakes to be opened
Follow the system prompt, press “-2-” come to changing brake pads program
Close the brakes
Please wait the braked are locked
Fit wheels
Check the brake fluid, top it up if necessary
Brake pads replacement mode was successfully done/programmed
Back to the main menu and exit the autel ds708 software
Disconnect DS708 scanner with vehicle
More information Please Search: Autel Maxidas ds708
